Putting Images Into Your Sig...

[kanezfan11]

Here are four simple steps to get a picture or logo into your signature:

1. Have an image that is 468 x 100 or less, and no bigger than 12KB. Usually there is someone helpful in this forum that will make you a sig that meets your requests and is already under Cafe limits.

2. Host your image. Places like http://www.imageshack.us are useful sites to host your sig and are very dependable.

3. After you have your link to your picture from the site hosting it, copy it into your signature box in your profile.

4. When you have your link in your signature, put [img] before the link and [/img] after the link. This allows the BBC code to work and will allow the picture to appear instead of the link itself.

Example: [img]http://www.yourlinkhere.com[/img]

These steps should be followed first... if you still don't know how to get a picture into your sig afterward, try reading the FAQ on the site or PM a graphic expert.

[MeShawn]

Thanks for posting this. Now hopefully one of the mods can make this a sticky.

[South Park Cows]

Thanks for posting this. Now hopefully one of the mods can make this a sticky.

It has been stickied.Thanks Kanez,this should help a lot of people out.

[portisfan24]

well put kanez

[airraid81]

I put a logo in my sig featuring Hopkin Green last night, but now, it shows a question mark or an "x" where the logo was.

[South Park Cows]

I put a logo in my sig featuring Hopkin Green last night, but now, it shows a question mark or an "x" where the logo was.

I have no problems seeing your sig.

[airraid81]

I fixed it earlier.

[kanezfan11]

Should probably update that the limit is 12 KB now.

[GreatestShowOnEarth]

why wont my sig show up??? I did what you said but it just shows the code and link!!!! HELP!

[mtryanks12]

why wont my sig show up??? I did what you said but it just shows the code and link!!!! HELP!

maybe taking out the ".thumb" in your code may help.

or give me a link to the thread with your sig and I can do it for you.